Sample rate:2.5G/S repetitive sampling 25MS/s single shot sampling
Fluke 125B ScopeMeter 40MHz Industrial Scope meter Industrial oscilloscope :
Fluke 125B, the full specifications of the Fluke 124 applies. On top, the Bus Health Test capability is included, as specified below. For further details on the general specification of the 125B, refer to the 123B/124B section
Bandwidth: 40 MHz
2.5 GS/s repetitive sampling
25 MS/s single shot sampling
Bus Health Test functions
Bus Health test:
Verifies the electrical parameters of industrial bus systems using automatic measurement and analysis functions. Next to that, an Eyepattern mode is provided for visual inspection of signal quality.
well within limits = ‘good’
within certain percentage of the limit values = ‘weak’
beyond limit values = ‘bad’
Limits values, as a default, are based on industry standard for the selected bus type or may be set by the user.
Bus systems supported:
AS-i (EN50295, 166 kb/s);
CAN-bus (ISO-11898, up to 1 Mb/s);
Interbus S (EIA-485, 500 kb/s);
ControlNet (61158 type 2, 5Mb/s);
Modbus (EIA-232 up to 115 kb/s and EIA-485 up to 10 Mb/s);
Foundation Fieldbus H1 (61158 type 1, 31.25 kb/s);
Profibus DP (EIA-485 up to 10 Mb/s);
Profibus PA (61158 type 1, 31.25 kb/s);
Ethernet 10Base2 (coaxial);
Ethernet 10BaseT (UTP, 10 Mb/s);
RS-232 (EIA-232, up to 115 kb/s);
RS-485 (EIA-485, up to 10 Mb/s);
user defined single wire or balanced system.
Waveform Parameter analysis with automatic read-out and parameter validation (good / weak / bad); test limits are based on industry standards or may be set by the user.
Eyepattern display mode.
Measured parameters (where applicable):
bias voltage level,
Eyepattern display mode:
Gives waveform display of bus signals with display persistence. Timebase and attenuator settings may be altered by the user.
Additional Power measurement capabilities (Fluke 125 only)
Power Factor (PF)
Single phase or balanced three-phase (delta-configuration) mains supply
Channel A; using STL120, voltage probe or direct input
Channel B, using i400s (included) or other compatible current clamp
Converts waveform information into a harmonics display (using FFT processing) which shows the relative amplitudes of the 1st up to the 33rd harmonic
Voltage waveform(Ch.A), Current wavefrom (Ch.B) or Power (Ch.A x Ch.B), automatically generated.
Harmonics Frequency range:
DC up to 33rd harmonic (for fundamental up to 60 Hz);
DC up to 24th harmonic (for fundamental up to 400 Hz).
Bargraph showing 1st up to 33rd harmonic and DC; amplitude displayed in % relative to fundamental
Relative amplitude of individual harmonics;
THD in %r or %f.
Industrial ScopeMeter hand held oscilloscope (40 MHz) with Bus Health Test
All models include:
STL120 Shielded Test Lead Set
HC120 Hook Clips
BB120 Shielded BNC adapter
AC120 Alligator clips
PM8907 Battery Charger/Line Voltage Adapter
BP120MH – NiMH Battery Pack (installed)
Getting started booklet
User manual (CD-ROM), multi-lingual
Fluke 125B/124B models also include:
VPS40 Voltage Probe, 40 MHz, 10:1
Fluke 125 models also include:
I400s AC Current Clamp
Fluke 125B is the ScopeMeter of choice for the maintenance engineer who deals with industrial machinery and the industrial network connecting his machinery the like. The Fluke 125B has all the functionality of the 124B plus it comes with the following extensions:
Bus Health mode gives a clear “Good / “Weak / “Bad indication for the electrical signals on industrial buses and networks, such as CAN-bus, Profi-bus, RS-232 and many more. The Fluke 125 validates the quality of the electrical signals as soon as any electrical signals are passed along the network. It checks the signal levels and speed, transition times and distortion, and compares these to the appropriate standards to help you find errors like improper cable connections and terminators. It helps you find the source of error in case communication comes to a halt. All the commonly found industrial network types are supported!
The 125B also offers advanced power measurements for single phase and balanced 3-phase systems, a Harmonics Mode and more.
Packaging & Shipping
• Shipment :
♦ We ship by DHL‚UPS ‚ Fedex ‚ TNT ‚ EMS express ‚ Air ship ‚ Sea ship and so on at the reasonable time.
♦ DHL ‚ UPS ‚ FEDEX ‚ TNT usually takes about 4~6days, more or less, it will be a little longer time if for remote region; it will be a little longer time, , if for buyer’s custom reason,
♦ EMS usually takes about 4~13days, more or less, it will be a little longer time if for remote region; it will be a little longer time,if for buyer’s custom reason,
♦ If you find any problem with the goods within 7 days since you get them, you could return the goods to us and we will resend a good new one to you after we receive the goods.
♦ Our warranty for the goods is one year for YH brand product, and we always test every product cautiously and strictly before sending them out to our customers.
if you have any question or want to know more about our company products, please feel free to contact us . thanks.
have a good day!
Yehai Technology Development Co., Ltd
Mobile : 86-13699890579
Tel : 86-755-26509606-807
Alibaba id: chinayehai
QQ number: 761600474
Transaction History of the Supplier
Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.